GFS/GLS and Silos

GFS/GLS & Silos design

The GFS/GLS & Silos cans need certain standards in the design and use. The national standard GFS/GLS & Silos cans are designed, manufactured and tested in strict accordance with HG2432 "technical conditions for glass lining equipment" GB150 "steel pressure vessel" and so on. The non GFS/GLS & Silos cans are designed and manufactured and inspected in accordance with the requirements of the customers.

GFS/GLS & Silos formula of industrial enamel reaction kettle consists mainly of silica, the content of silica is 50% to 80%, the three oxidation two boron content is about 12%, the content of sodium oxide is about 12%, and the content of cobalt oxide is about 3%. The enamel of enamel reactor is a glassy substance formed by mixing or melting or semi fusion of various chemical mineral materials and chemical raw materials.

In the production process of GFS/GLS & Silos, it can be divided into matrix agent, flux, opaque agent, oxidant, coloring agent, auxiliaries and so on. Not every component plays a role, and sometimes matter can be either a matrix agent, a flux, a matrix agent, or a three solvent of two boron.

The ratio of the glaze group can form the bottom glaze and the surface glaze, and the bottom glaze is the porcelain glaze which is closely combined with the steel body. Its distribution ratio increases the content of compacted agent, strengthens the bonding force between the porcelain layer and the steel body, and the distribution ratio of the surface glaze increases the content of the corrosion resistance component, making the enamel enamel very good. GH, corrosion resistance, different components of the enamel layer can also be presented in different colors, such as blue and white.

According to the different requirements of sintering process temperature, it is divided into high temperature glaze and low temperature glaze. The composition and firing temperature of high temperature glaze and low temperature glaze are quite different. The high temperature of the high temperature porcelain glaze is higher, its physical and chemical properties are relatively enhanced, thus the stability and corrosion resistance of the enamel layer are improved, the temperature of the warm enamel is lower and the temperature is low.

Lower. The color of finished glass is easy to distinguish: high temperature porcelain glaze is pure bright blue, and low temperature porcelain glaze is blue black and dark black, because the composition and burning cost of high temperature porcelain glaze are higher than low temperature. E porcelain glaze, so some small factories often choose low-temperature glaze as camouflage works, so users must pay attention.

storing food in silo

What material is GFS/GLS & Silos air preheater made of? It is a kind of energy saving and environmental protection equipment, using plane plate or press type plate as heat transfer element, and the design idea of building block by welding seal into plate bundle around the plate, making the layout of the whole machine flexible and adaptable, and the unique air film TM technology can effectively prevent dew point corrosion problem, suitable for oil refining, chemical industry, Air preheating and flue gas cooling in iron and steel, metallurgy, electric power and automobile industries.

GFS/GLS & Silos factory

The function of GFS/GLS & Silos air preheater is heating, so that the atomizing performance of fuel mixed with air is better, full combustion is achieved, and economy and power are improved. The way of preheating is electric heating, exhaust heating and cooling liquid heating.

GFS/GLS & Silos air preheater is made of anticorrosive material for air preheater. Commonly used air preheater with enamel tube made of borosilicate glass tube and cast iron pipe, the user can choose according to the specific circumstances.

Do you remember the enamel washbasin or cup used for an hour? Just bought new and bright, but accidentally dropped or damaged, it will reveal the iron inside, slowly began to rust. Poor enamel, no tower water supply is also the same reason, as long as a little damage will be very easy to rust.

Now there are many PE towers, water supply towers, steel towers and 304 stainless steel towers without water supply. Because of its durability, light and small convenience, clean and hygienic and good anticorrosive properties, it is recognized and accepted by the market. Because good products will not be affected by the time taken, but the bad products will slowly withdraw from the market because of the decrease in market demand.

The GFS/GLS & Silos supply device is used to detect pressure of pressure tank through pressure sensor, and the pressure electrical signal is automatically controlled by the control circuit to recognize, enlarge and control the action of the contactor, so that the pump can automatically run and stop according to the pressure change in the pressure tank and achieve the purpose of automatic water supply. The working process of the non tower water supply is the start of the pump, and the water is injected into the pressure tank through the check valve to increase the pressure in the tank. When the pressure reaches the upper limit of the set pressure, the pressure automatic controller automatically closes the pump to stop the pump running.

Bolted Steel Storage Tanks