wwtp methane biogas storage tank density presure

2019-03-08 16:19:22  By:NVirotech Bolted Tank (2158)

wwtp methane biogas storage tank density presure range

wwtp methane biogas storage tank density presure refers to the range of pressure after the gas or liquid is filled in the gas storage tank. The material and installation method of methane biogas storage tank are different, and the pressure is also different.

wwtp methane biogas storage tank density presure

The manufacture of methane biogas storage tank needs to be inspected by the special quality inspection department of the state before it can be used. If it encounters inferior gas storage tank, it will be very dangerous! So when we choose to buy, we must recognize the regular methane biogas storage tank for purchase.

wwtp methane biogas storage tank density presure (code C, spherical tank code B) of biogas storage tank in municipal sewage treatment plant is mainly used to store, hold gases, liquids, liquefied gases and other media pressure vessels, such as various types of tanks.

biogas assembled tank

biogas assembled tank

wwtp methane biogas storage tank density presure usually does not exceed 20 kPa. If pressurized by pressure pump, it can reach about 5 kg. If the pressure is too high, it can cause danger.

wwtp methane biogas storage tank density presure introduce

People living in cities know the importance of sewage treatment plants, because they can treat sewage and provide convenience for life. Sewage treatment can produce biogas, so the problem of wwtp methane biogas storage tank density presure is involved. So what material is the commonly used biogas storage tank of municipal sewage treatment plant made of?

wwtp methane biogas storage tank is a special equipment for storing biogas, which can stabilize the pressure of the system. Biogas storage tanks can be divided into stainless steel gas storage tanks, carbon steel stainless steel gas storage tanks and alloy stainless steel gas storage tanks according to the different metal materials used.

The volume of gas storage tank varies from 0.3m3 to 80m3, and the structure is vertical. The design pressure is 0.8, 1.0, 1.3, 1.6, 2.5, 3.0 and 4.0MPa series, which are made of carbon steel and stainless steel. Each gas storage tank is equipped with safety valve, pressure gauge, sewage discharge and paired flange.

bolted steel water tank specifications

bolted steel water tank specifications

Because the pressure of biogas is relatively low, if the compression cost is relatively high, only variable volume gas storage tanks can be used. At present, there are three kinds of biogas tanks with variable volume, dry type, wet type, double-film gas storage tank and so on. The first two are seldom used, mainly for anticorrosion and cost. It is suggested to use double-film gas storage tank.

Guestbook

write down your requirement and contact details in the following form to get the latest price of this product within one day!